SEVENTH CSIR DIAMOND JUBILEE INVENTION
AWARD FOR SCHOOL CHILDREN (CDJIA-2008)
Council of Scientific & Industrial Research (CSIR) is the premier Industrial R&D
Organisation in India. On the occasion of its Diamond Jubilee in 2002, CSIR initiated
Invention Awards for school children to create awareness, interest and motivation for
Intellectual Property amongst children.
On the occasion of the World Intellectual Property Day which is celebrated through out the world on 26th April, CSIR invites applications for the ‘Seventh CSIR Diamond Jubilee Invention Award(CDJIA) for School Children-2008’.
The first prize winner would also become eligible for WIPO’s Young Inventor’s Award carrying a medal and a certificate.
Applicant must provide the details of the invention submitted for the award in not more than 5000 words in English/Hindi including an abstract (in not more than 100 words),authenticated (by giving seal and date) and sent through the Principal/ Head of the School where the student is enrolled and personal details on a separate page as follows:
Name, date of birth, school and residential address, class, telephone no. (residence/school),e-mail address.
In case of proposals already selected for state, national, international or equivalent awards,only the subject matter covering the improvements need to be submitted for consideration of CDJIA-2008. Published inventions would be considered as per the provisions of the Patent Act.
The applications for the award not exceeding 5000 words in English/Hindi with requisite drawings will be considered. The write-up must describe the subject matter in a problem - solution mode and highlighting the novel and non-obviousness feature of the invention and its advantages.
Any Indian student enrolled in an India n school below the age of 18 years as on 31st July 2008 can apply.
The invention submitted should be one that is globally novel, non-obvious and utilitarian. It could be a new concept or idea or a solution to an existing problem or completely a new method/ process/ device/ utility. It is not essential/ necessary that the invention should have been worked, only the concept of the invention should have been proved through a model, a prototype or experimental data. Details of any assistance/ guidance provided by teachers/parents/friends or others must be appropriately mentioned and acknowledged.
Typed applications to be sent by Registered Post/Courier to: Head, Intellectual Property Management Division, CSIR, NISCAIR Building, 14 Satsang Vihar Marg, Special
Institutional Area, New Delhi - 110 067 with the envelope marked on top left hand corner 'CDJIA-2008'.
You may also send application through addressed to
head.ipmd@niscair.res.in. However, a hard copy should also follow through post with
Principal’s authentication.
Applications received on or before 30th September 2008 will be considered for the Award.
Prizes : There are in all 60 prizes. Besides a certificate, the cash awards are:
First Prize (1 No.) Rs. 50,000/-
Second Prize (2 Nos.) Rs. 25,000/- each
Third Prize (3 Nos.) Rs. 15,000/- each
Fourth Prize (4 Nos.) Rs. 10,000/ - each
Fifth Prize (50 nos.) Rs. 5,000/- each
The awardees will be selected by a high level Awards Selection Committee. If required, the short listed candidates may be called for Interview at Delhi or at any other appropriate place. The decision of the Awards Selection Committee / CSIR will be final and binding on the applicants and no enquiries/correspondence in this regard will be entertained.
The Awards will be announced on January 1,2009, at New Delhi and would be communicated to the Awardees only.
For more information, please visit our site at www.csir.res.in
You can download document of the annoucement from
http://www.cmeri.res.in/oth/docs/ipmd08.pdf
Showing posts with label CMERI. Show all posts
Showing posts with label CMERI. Show all posts
Tuesday, June 24, 2008
Engineers of CMERI
Director, CMERI
Dr. Gopal P. Sinha, who took over as Director, CMERI, Durgapur w.e.f. 10th Dec, 2001 was born on 17th July, 1946 and was Head, Operations Research Group, TATA STEEL. He did his B.Sc (Engg) in Mechanical Engineering in 1967 and obtained PGDBM from XLRI in 1975 and then Ph.D in Industrial Engineering from IIT, Kharagpur in 1983.
He joined TATA STEEL in 1970 and served there in various capacities till he attained the post of Head, Operational and Cost Research, dealing with Business Planning and Cost Competitiveness. During 1994 he received the Franz Edelman Award for best OR/MS work in the world jointly from the TATA Institute of Management Sciences (TIMS) and the Operations Research Society of America (ORSA) at Boston, USA.
Earlier in 1993, he received the IFORS (International Federation of Operations Research) award for the best OR work in third world. He received the SAIL Gold Medal in 2000 for his work on competitivess of Indian Steel Industry. He is also the recipient of the Distinguished Engineer Award from the Institution of Engineers, Jamshedpur Chapter in 2000.
Condition Monitoring
R K Biswas, Scientist EII Group Head
Tapan Kumar Paul, Scientist EII
Kamalakishor J Uke, Scientist C
Design and Development of Mechanical System
S Majumder, Scientist F
G BALA MURUGAN, Scientist E1
R W Lanjewar, Scientist C
R K Jain, Scientist C
R K Bharilya, Scientist C
U. S. Patkar, Scientist C
Manufacturing Technology Group
Amit Jyoti Banerjee, Scientist EII Group Head
Ashok Kr. Prasad, Scientist C
B. Sampat Kumar, Scientist C
Rajpal Singh, Scientist C
Sankar Karmakar, Scientist C
Dr. Gopal P. Sinha, who took over as Director, CMERI, Durgapur w.e.f. 10th Dec, 2001 was born on 17th July, 1946 and was Head, Operations Research Group, TATA STEEL. He did his B.Sc (Engg) in Mechanical Engineering in 1967 and obtained PGDBM from XLRI in 1975 and then Ph.D in Industrial Engineering from IIT, Kharagpur in 1983.
He joined TATA STEEL in 1970 and served there in various capacities till he attained the post of Head, Operational and Cost Research, dealing with Business Planning and Cost Competitiveness. During 1994 he received the Franz Edelman Award for best OR/MS work in the world jointly from the TATA Institute of Management Sciences (TIMS) and the Operations Research Society of America (ORSA) at Boston, USA.
Earlier in 1993, he received the IFORS (International Federation of Operations Research) award for the best OR work in third world. He received the SAIL Gold Medal in 2000 for his work on competitivess of Indian Steel Industry. He is also the recipient of the Distinguished Engineer Award from the Institution of Engineers, Jamshedpur Chapter in 2000.
Condition Monitoring
R K Biswas, Scientist EII Group Head
Tapan Kumar Paul, Scientist EII
Kamalakishor J Uke, Scientist C
Design and Development of Mechanical System
S Majumder, Scientist F
G BALA MURUGAN, Scientist E1
R W Lanjewar, Scientist C
R K Jain, Scientist C
R K Bharilya, Scientist C
U. S. Patkar, Scientist C
Manufacturing Technology Group
Amit Jyoti Banerjee, Scientist EII Group Head
Ashok Kr. Prasad, Scientist C
B. Sampat Kumar, Scientist C
Rajpal Singh, Scientist C
Sankar Karmakar, Scientist C
CMERI - Research Papers - Conference Presentations
CONFERENCE PUBLLICATIONS DURING THE PERIOD 2000-2004
1. .A finite element approach for residual stress determination in rollerstraightened
rail; Dr. S.L. Srimani, Dr. J. Basu, D.S. Gupta. Accepted for
presentation in the Second International Conference on Theoretical,
Applied, Computational & Experimental Mechanics (ICTACEM) 2001 held
during December 2001.
2. A novel device for filling frames with splints for the manufacture of
safety matches; G. Balamurugan, N.P. Mukherjee, Avijit Singha
3. A practical approach to assess the damage process of heat resistant
materials for power engineering, B.B. Jha, ‘Feedback’ journal published by
BHEL.
4. A practical approach to residual life assessment of power plant
components in service; B.B. Jha, S. Roy, Proceedings of the International
Symposium on materials ageing and life assessment, October 3-6, 2000,
Kalpakkam, India, Allied Publishers Limited, Chennai, Volume 3, pp 1188 -
1193.
5. An ingenious machine for the manufacture of globoidal cam, G.
Balamurugan & N.P. Mukherjee, Proceedings of the 10th. National
Conference on Machines & Mechanisms, IIT, Kharagpur, pp 343-350.
6. An unsuccessful story of an ID fan balancing - a case study; R.K. Biswas,
Dr. R. Sen, Dr. A. Mukhopadhyay, Proceedings of the National Seminar on
‘Maintenance Engineering – the Recent Trends’ pp 171-178.
7. Analysis of heat transfer from a moving surface due to impinging
laminar jets; H. Chattopadhyay, Sujay K. Saha; January 3-5, 2002,
Proceedings of the 5th. ISHME-ASME Heat & Mass Transfer Conference,
pp 289-294, Tata McGraw Hill.
8. Application of design tools with computer simulation in solving foundry
problems – a case study; B Sampath Kumar, MK Jas & SK Samanta.
Presented in the CARTM 2003, Kalyani Government Engineering College,
November 2003.
9. Automated system for card generation for a Jacquard loom used in the
production of Baluchari sarees; Partha Bhattacharjee, Anjali Chatterjee,
Proceedings of the TIMA 2001.
10. Bridge tooling as a rapid injection mould tooling process; K.P.
Roysarkar, A. Sinha, Proceedings of the 19th AIMTDR Conference 2000,
Narosa Publishing House, pp 715 – 721.
11. CFD- A tool for engineering analysis; H. Chattopadhyay, Proceedings of
the 36th. Annual Convention of Computer Society of India, November 2001, pp
C-1 to C-6.
12. CFD studies on enhanced transport using vectored jets; H.
Chattopadhyay; Presented in the International Seminar on Grain Drying in
South Asia.
13. CO2-free hydrogen from hydrocarbon for fuel cell applications, A.B.
Datta, P.K. Chatterjee & K.M. Kundu, CD Proceedings of the Two Day
Conference on Fuel Cell Technology – Emerging Trends, Gurgaon.
4. Collision-free, near-optimal path planning of a manipulator using a GAFuzzy
approach, Shibendu Sekhar Roy, Scientist, CMERI, D.K. Pratihar &
Arnab Mukherjee, R.E. College, Durgapur, Proceedings of the 10th. National
Conference on Machines & Mechanisms, IIT, Kharagpur, pp 201-208.
15. Combustion of a single coal particle - an analysis; Dr. K. M. Kundu, Dr. R.
Das, Dr. A.B. Datta & Dr. P.K. Chatterjee. January 3-5, 2002, Proceedings of
the 5th. ISHMT-ASME Heat & Mass Transfer Conference, pp 964-970, Tata
McGraw Hill.
16. Continuous spouted bed drying of paddy; A.B. Dutta, P.K. Chatterjee, K.M.
Kundu, S.S. Nandi & B. Chaudhury; Presented in the International Seminar on
Grain Drying in South Asia.
17. Design & development of a remotely operated vehicle (ROV); G.
Purakayastha, S. Datta, S. Nandy, S.N. Shome
18. Design & development of underwater thruster for 1000m depth at sea; S.
Nandy, D. Banerjee, S.N. Shome
19. Development of a 60kg payload 4-axes SCARA configuration
manipulator; G. Purakayastha, S. Datta, S.N. Nandy, S.N. Shome
20. Development of process technology and manufacturing of austempered
ductile iron components for engineering applications; AC Ganguly, MK
Jas, SK Samanta. Presented in the National Conference on Investment
Casting 2003.
21. Development of single-chip microcontroller based position control
system for stitching cricket/hockey balls; J. Roychoudhury, U. Datta, G.
Balamurugan, Dr. N.P. Mukherjee, Proceedings of the TIMA 2001.
22. Diagnostics in maintenance of equipment; Dr. S. Dasgupta, P.
Bhattacharjee, Presented in the National Seminar on ‘Maintenance
Engineering – the Recent Trends’.
23. Direct Metal Casting from RP mould using QuickCast technique - CMERI
experience; P.S. Banerjee, M.K. Banerjee, Palash Maji, Proceedings of the
19th AIMTDR Conference 2000, Narosa Publishing House, pp 707 – 713.
24. Effect of plating on torque load bearing capacity of shrink fitted
assemblies, by D. Ramesh Rajakumar, B. Ramamoorthy & S. Natarajan,
Proceedings of the National Conference on Recent Advances in Materials
Processing, September 2001, Annamalai University, pp 116-121.
25. Efficient performance appraisal and optimal use of crossflow
evaporative multi cell water cooling tower; Dr. M. Prasad. January 3-5,
2002, Proceedings of the 5th. ISHMT-ASME Heat & Mass Transfer
Conference, pp 1364-1369, Tata McGraw Hill.
26. Emerging technologies for development of pressure die casting dies &
injection moulds, Nagahanumaiah, B. Ravi, N.P. Mukherjee & T. Mahata,
Proceedings of the Symposium on Manufacturing Excellence, January 7-8
2002, IIT, Madras, pp 85-86.
27. Epoxy concrete – an alternative material for development of machine
tool structures, K.P. Roysarkar, Proceedings of the 10th. National
Conference on Machines & Mechanisms, IIT, Kharagpur, pp 297-304.
28. Evaluation of process parameters of epoxy concrete: a structural
material for precision machines, K.P. Roysarkar, Proceedings of the 2nd.
National Conference on Precision Engineering, PSG College of
Technology, pp 41-49.
29. Exploration of colour removal from waste water through adsorption and
photocatalysis using flyash and sunlight, by Debabrata Chatterjee,
Biswajit Ruj, Anima Mahata and SK Maulick, Proceedings of the International
Congress of Chemistry & Environment, December 16-18, 2001, Indore, pp
42.
30. Failure analysis of HP turbine casing stud; A Saha, D Ghosh & AK Shukla.
Presented in the National Symposium on ‘Towards Self Reliance in Power’,
April 2003.
31. Fluidised bed drying; K.M. Kundu, R. Das, A.B. Dutta & P.K. Chatterjee;
Presented in the International Seminar on Grain Drying in South Asia.
32. Improvement of engineering system through quality assurance, FMCEA
and reliability approach; T Sarkar, TK Paul & TK Chatterjee. Presented in
the International Symposium on Emerging Strategies for Improving
Productivity, Quality & Reliability, December 12-14 2003.
33. Innovation and competitiveness; G.P. Sinha
34. Intelligent comfort level sensing through multi-sensor integration using
embedded fuzzy approximation technique; J. Roy Chaudhuri
35. Investigation into platen superheater tube failure of a power boiler;
D.Ghosh, P. Roy & B.N. Singh. Presented in the National Symposium on
‘Towards Self Reliance in Power’, April 2003, CMERI, Durgapur.
36. Investigation on effective sensing space for different sensor locations
inside the barbette; S. Nandy, D. Banerjee, S.N. Shome.
37. Investment casting: world overview; BN Mandal, GS Reddy. Presented in
the National Conference on Investment Casting 2003.
38. Issues associated with conventional tooling applications in investment
casting; A Mantry, Nagahanumaiah, RK Padhi, BRK Ventakapathy.
Presented in the National Conference on Investment Casting 2003.
39. Metal casting process optimization through computer simulation; MK
Jas, SK Samanta, DP Chattopadhyay. Presented in the National Conference
on Investment Casting 2003.
40. Microwave drying; M.K. Karmakar, K.M. Kundu, A.B. Dutta, P.K. Chatterjee
& S.S. Nandi; Presented in the International Seminar on Grain Drying in South
Asia.
41. Numerical simulation based on turbulence closure for two-phase gas
particle transport in confined systems & certain experimental studies; A.
Mitter, J.P. Malhotra, H.T. Jadeja, Proceedings of the Second International
Conference on Fluid Mechanics and Fluid Power, I.I.T., Roorkee, 12-14
December 2002.
42. On the drying kinetics in drying process, K.M. Kundu, R. Das, A.B. Datta &
P.K. Chatterjee, Proceedings of the Asia-Oceania Drying Conference
(ADC-01), pp 657-659, ed. Daud et. Al., The Institution of Chemical
Engineers.
43. On the energy aspects in drying; Dipak Verma, K.M. Kundu, A.B. Dutta &
P.K. Chatterjee; Presented in the International Seminar on Grain Drying in
South Asia.
44. Optimum design of railway wheel profile; Dr. G.S. Roy, Dr. S.L. Srimani,
Dr. J. Basu, Proceedings of the Second International Conference on
Theoretical, Applied, Computational & Experimental Mechanics
(ICTACEM) 2001 to be held during December 2001.
45. Prediction of grinding power using a GA-Fuzzy approach, A.K. Nandi,
D.K. Pratihar & M.K. Banerjee, Proceedings of the 16th. National Conference
on Emerging Trends in Manufacturing, January 19-20, 2002, pp 75-81.
46. Quality evaluation of rolling element bearings, S.C. Nidhi & Ranjan Sen,
Proceedings of the Third International Conference on Industrial Tribology.
47. Rapid tooling for producing plastic prototype through vacuum casting
technology - a case study; M.K. Banerjee, K.P. Roysarkar, Proceedings of
the 19th AIMTDR Conference 2000, Narosa Publishing House, pp 693 – 697.
48. Remedial measure for removal of iron from groundwater; A.K.
Bandopadhyay, B. Ruj, S.K. Chatterjee
49. Removal of iron from drinking water – an easy and appropriate
technology; A.K. Bandopadhyay, B. Ruj, S.K. Chatterjee
50. Residual life estimation of the superheater & reheater tubes based on
oxide scale thickness measurement; B.B. Jha, S.C. Nidhi
51. Reverse engineering for art castings – preliminary investigations with
case study by B. Sampath Kumar, S.M. Sutar and Nagahanumaiah,
Scientists, CMERI, Proceedings of the 50th Indian Foundry Congress 2002.
52. Role of CFD in today’s context; H. Chattopadhyay
53. Simulation of joint position response of 60 kg payload 4-axes SCARA
configuration manipulator taking dynamical effects into consideration,
by G. Purakayastha, S. Datta, S.N. Nandy & S.N. Shome, Scientists, CMERI.
Proceedings of the WSEAS International Conference, Cancun, Mexico.
54. Solar beam energy input effectiveness of intermittently tracking flat
plate collector with south facing reflector; Dr. M. Prasad, S.K. Majumdar,
Proceedings of the 24th National Renewable Energy Convention 2000,
Allied Publishers Limited, pp 26 – 32.
55. Solid modeling as a driving tool in compression of development time - a
case study of an impeller; B. Sampath Kumar, Anupam Sinha, M.K.
Banerjee. Proceedings of the SDRC Users Meet.
56. Stepper motor driven micro-indexing mechanism using microcontroller,
by U. Datta, J. Roychaudhuri, N.P. Mukherjee & G. Balamurugan,
Proceedings of the Symposium on Manufacturing Excellence, January 7-8
2002, IIT, Madras, pp 69-70.
57. Study on development of cast components through rapid prototype soft
tooling process by B. Mondal, A.K. Lohar, S.K. Samanta and M.K. Jas,
Scientists, CMERI, Proceedings of the 50th Indian Foundry Congress 2002.
58. Study on strength and warpage of stereolithography models; P.S.
Banerjee, P.K. Maji, M.K. Banerjee, R.N. Banerjee, T.K. Chatterjee
59. Synthetic composite: a non-conventional material for machine tool
structures; K.P. Roysarkar, M.K. Banerjee
60. Technological aspects of particulates reinforced investment cast
composites; AK Lohar, SK Das, D Chakraborty, BN Mandal. Presented in the
National Conference on Investment Casting 2003.
61. Terrain aided autonomous navigation of subsea robots using natural
features; Somjyoti Majumder
62. Three-fold periodic tracking of flat plate solar collector with specular
reflector at top edge; M. Prasad
63. Tool path planning for investment casting functional prototypes /
production moulds; Nagahanumaiah, NP Mukherjee. Presented in the
National Conference on Investment Casting 2003.
64. Torque-load prediction in shrink fitted assemblies using artificial neural
network, D. Ramesh Raja Kumar, B. Ramamoorthy, S. Natarajan,
Proceedings of the 2nd. National Conference on Precision Engineering,
PSG College of Technology, pp 237-244.
65. Towards self reliance in power; GP Sinha & SK Neogi. Presented in the
National Symposium on ‘Towards Self Reliance in Power’, April 2003.
66. Trend prediction from steam turbine responses of vibration &
eccentricity; Dr. B.K. Sinha. Journal of Power & Energy.
67. Turbulence modelling using large-eddy simulation; H. Chattopadhyay
68. Turbulent flow structure due to a jet impinging on a moving plate; H.
Chattopadhyay
69. Viewing the IP Domain of Food Processing, K.K. Sanyal, Invention
Intelligence, March-April 2001.
1. .A finite element approach for residual stress determination in rollerstraightened
rail; Dr. S.L. Srimani, Dr. J. Basu, D.S. Gupta. Accepted for
presentation in the Second International Conference on Theoretical,
Applied, Computational & Experimental Mechanics (ICTACEM) 2001 held
during December 2001.
2. A novel device for filling frames with splints for the manufacture of
safety matches; G. Balamurugan, N.P. Mukherjee, Avijit Singha
3. A practical approach to assess the damage process of heat resistant
materials for power engineering, B.B. Jha, ‘Feedback’ journal published by
BHEL.
4. A practical approach to residual life assessment of power plant
components in service; B.B. Jha, S. Roy, Proceedings of the International
Symposium on materials ageing and life assessment, October 3-6, 2000,
Kalpakkam, India, Allied Publishers Limited, Chennai, Volume 3, pp 1188 -
1193.
5. An ingenious machine for the manufacture of globoidal cam, G.
Balamurugan & N.P. Mukherjee, Proceedings of the 10th. National
Conference on Machines & Mechanisms, IIT, Kharagpur, pp 343-350.
6. An unsuccessful story of an ID fan balancing - a case study; R.K. Biswas,
Dr. R. Sen, Dr. A. Mukhopadhyay, Proceedings of the National Seminar on
‘Maintenance Engineering – the Recent Trends’ pp 171-178.
7. Analysis of heat transfer from a moving surface due to impinging
laminar jets; H. Chattopadhyay, Sujay K. Saha; January 3-5, 2002,
Proceedings of the 5th. ISHME-ASME Heat & Mass Transfer Conference,
pp 289-294, Tata McGraw Hill.
8. Application of design tools with computer simulation in solving foundry
problems – a case study; B Sampath Kumar, MK Jas & SK Samanta.
Presented in the CARTM 2003, Kalyani Government Engineering College,
November 2003.
9. Automated system for card generation for a Jacquard loom used in the
production of Baluchari sarees; Partha Bhattacharjee, Anjali Chatterjee,
Proceedings of the TIMA 2001.
10. Bridge tooling as a rapid injection mould tooling process; K.P.
Roysarkar, A. Sinha, Proceedings of the 19th AIMTDR Conference 2000,
Narosa Publishing House, pp 715 – 721.
11. CFD- A tool for engineering analysis; H. Chattopadhyay, Proceedings of
the 36th. Annual Convention of Computer Society of India, November 2001, pp
C-1 to C-6.
12. CFD studies on enhanced transport using vectored jets; H.
Chattopadhyay; Presented in the International Seminar on Grain Drying in
South Asia.
13. CO2-free hydrogen from hydrocarbon for fuel cell applications, A.B.
Datta, P.K. Chatterjee & K.M. Kundu, CD Proceedings of the Two Day
Conference on Fuel Cell Technology – Emerging Trends, Gurgaon.
4. Collision-free, near-optimal path planning of a manipulator using a GAFuzzy
approach, Shibendu Sekhar Roy, Scientist, CMERI, D.K. Pratihar &
Arnab Mukherjee, R.E. College, Durgapur, Proceedings of the 10th. National
Conference on Machines & Mechanisms, IIT, Kharagpur, pp 201-208.
15. Combustion of a single coal particle - an analysis; Dr. K. M. Kundu, Dr. R.
Das, Dr. A.B. Datta & Dr. P.K. Chatterjee. January 3-5, 2002, Proceedings of
the 5th. ISHMT-ASME Heat & Mass Transfer Conference, pp 964-970, Tata
McGraw Hill.
16. Continuous spouted bed drying of paddy; A.B. Dutta, P.K. Chatterjee, K.M.
Kundu, S.S. Nandi & B. Chaudhury; Presented in the International Seminar on
Grain Drying in South Asia.
17. Design & development of a remotely operated vehicle (ROV); G.
Purakayastha, S. Datta, S. Nandy, S.N. Shome
18. Design & development of underwater thruster for 1000m depth at sea; S.
Nandy, D. Banerjee, S.N. Shome
19. Development of a 60kg payload 4-axes SCARA configuration
manipulator; G. Purakayastha, S. Datta, S.N. Nandy, S.N. Shome
20. Development of process technology and manufacturing of austempered
ductile iron components for engineering applications; AC Ganguly, MK
Jas, SK Samanta. Presented in the National Conference on Investment
Casting 2003.
21. Development of single-chip microcontroller based position control
system for stitching cricket/hockey balls; J. Roychoudhury, U. Datta, G.
Balamurugan, Dr. N.P. Mukherjee, Proceedings of the TIMA 2001.
22. Diagnostics in maintenance of equipment; Dr. S. Dasgupta, P.
Bhattacharjee, Presented in the National Seminar on ‘Maintenance
Engineering – the Recent Trends’.
23. Direct Metal Casting from RP mould using QuickCast technique - CMERI
experience; P.S. Banerjee, M.K. Banerjee, Palash Maji, Proceedings of the
19th AIMTDR Conference 2000, Narosa Publishing House, pp 707 – 713.
24. Effect of plating on torque load bearing capacity of shrink fitted
assemblies, by D. Ramesh Rajakumar, B. Ramamoorthy & S. Natarajan,
Proceedings of the National Conference on Recent Advances in Materials
Processing, September 2001, Annamalai University, pp 116-121.
25. Efficient performance appraisal and optimal use of crossflow
evaporative multi cell water cooling tower; Dr. M. Prasad. January 3-5,
2002, Proceedings of the 5th. ISHMT-ASME Heat & Mass Transfer
Conference, pp 1364-1369, Tata McGraw Hill.
26. Emerging technologies for development of pressure die casting dies &
injection moulds, Nagahanumaiah, B. Ravi, N.P. Mukherjee & T. Mahata,
Proceedings of the Symposium on Manufacturing Excellence, January 7-8
2002, IIT, Madras, pp 85-86.
27. Epoxy concrete – an alternative material for development of machine
tool structures, K.P. Roysarkar, Proceedings of the 10th. National
Conference on Machines & Mechanisms, IIT, Kharagpur, pp 297-304.
28. Evaluation of process parameters of epoxy concrete: a structural
material for precision machines, K.P. Roysarkar, Proceedings of the 2nd.
National Conference on Precision Engineering, PSG College of
Technology, pp 41-49.
29. Exploration of colour removal from waste water through adsorption and
photocatalysis using flyash and sunlight, by Debabrata Chatterjee,
Biswajit Ruj, Anima Mahata and SK Maulick, Proceedings of the International
Congress of Chemistry & Environment, December 16-18, 2001, Indore, pp
42.
30. Failure analysis of HP turbine casing stud; A Saha, D Ghosh & AK Shukla.
Presented in the National Symposium on ‘Towards Self Reliance in Power’,
April 2003.
31. Fluidised bed drying; K.M. Kundu, R. Das, A.B. Dutta & P.K. Chatterjee;
Presented in the International Seminar on Grain Drying in South Asia.
32. Improvement of engineering system through quality assurance, FMCEA
and reliability approach; T Sarkar, TK Paul & TK Chatterjee. Presented in
the International Symposium on Emerging Strategies for Improving
Productivity, Quality & Reliability, December 12-14 2003.
33. Innovation and competitiveness; G.P. Sinha
34. Intelligent comfort level sensing through multi-sensor integration using
embedded fuzzy approximation technique; J. Roy Chaudhuri
35. Investigation into platen superheater tube failure of a power boiler;
D.Ghosh, P. Roy & B.N. Singh. Presented in the National Symposium on
‘Towards Self Reliance in Power’, April 2003, CMERI, Durgapur.
36. Investigation on effective sensing space for different sensor locations
inside the barbette; S. Nandy, D. Banerjee, S.N. Shome.
37. Investment casting: world overview; BN Mandal, GS Reddy. Presented in
the National Conference on Investment Casting 2003.
38. Issues associated with conventional tooling applications in investment
casting; A Mantry, Nagahanumaiah, RK Padhi, BRK Ventakapathy.
Presented in the National Conference on Investment Casting 2003.
39. Metal casting process optimization through computer simulation; MK
Jas, SK Samanta, DP Chattopadhyay. Presented in the National Conference
on Investment Casting 2003.
40. Microwave drying; M.K. Karmakar, K.M. Kundu, A.B. Dutta, P.K. Chatterjee
& S.S. Nandi; Presented in the International Seminar on Grain Drying in South
Asia.
41. Numerical simulation based on turbulence closure for two-phase gas
particle transport in confined systems & certain experimental studies; A.
Mitter, J.P. Malhotra, H.T. Jadeja, Proceedings of the Second International
Conference on Fluid Mechanics and Fluid Power, I.I.T., Roorkee, 12-14
December 2002.
42. On the drying kinetics in drying process, K.M. Kundu, R. Das, A.B. Datta &
P.K. Chatterjee, Proceedings of the Asia-Oceania Drying Conference
(ADC-01), pp 657-659, ed. Daud et. Al., The Institution of Chemical
Engineers.
43. On the energy aspects in drying; Dipak Verma, K.M. Kundu, A.B. Dutta &
P.K. Chatterjee; Presented in the International Seminar on Grain Drying in
South Asia.
44. Optimum design of railway wheel profile; Dr. G.S. Roy, Dr. S.L. Srimani,
Dr. J. Basu, Proceedings of the Second International Conference on
Theoretical, Applied, Computational & Experimental Mechanics
(ICTACEM) 2001 to be held during December 2001.
45. Prediction of grinding power using a GA-Fuzzy approach, A.K. Nandi,
D.K. Pratihar & M.K. Banerjee, Proceedings of the 16th. National Conference
on Emerging Trends in Manufacturing, January 19-20, 2002, pp 75-81.
46. Quality evaluation of rolling element bearings, S.C. Nidhi & Ranjan Sen,
Proceedings of the Third International Conference on Industrial Tribology.
47. Rapid tooling for producing plastic prototype through vacuum casting
technology - a case study; M.K. Banerjee, K.P. Roysarkar, Proceedings of
the 19th AIMTDR Conference 2000, Narosa Publishing House, pp 693 – 697.
48. Remedial measure for removal of iron from groundwater; A.K.
Bandopadhyay, B. Ruj, S.K. Chatterjee
49. Removal of iron from drinking water – an easy and appropriate
technology; A.K. Bandopadhyay, B. Ruj, S.K. Chatterjee
50. Residual life estimation of the superheater & reheater tubes based on
oxide scale thickness measurement; B.B. Jha, S.C. Nidhi
51. Reverse engineering for art castings – preliminary investigations with
case study by B. Sampath Kumar, S.M. Sutar and Nagahanumaiah,
Scientists, CMERI, Proceedings of the 50th Indian Foundry Congress 2002.
52. Role of CFD in today’s context; H. Chattopadhyay
53. Simulation of joint position response of 60 kg payload 4-axes SCARA
configuration manipulator taking dynamical effects into consideration,
by G. Purakayastha, S. Datta, S.N. Nandy & S.N. Shome, Scientists, CMERI.
Proceedings of the WSEAS International Conference, Cancun, Mexico.
54. Solar beam energy input effectiveness of intermittently tracking flat
plate collector with south facing reflector; Dr. M. Prasad, S.K. Majumdar,
Proceedings of the 24th National Renewable Energy Convention 2000,
Allied Publishers Limited, pp 26 – 32.
55. Solid modeling as a driving tool in compression of development time - a
case study of an impeller; B. Sampath Kumar, Anupam Sinha, M.K.
Banerjee. Proceedings of the SDRC Users Meet.
56. Stepper motor driven micro-indexing mechanism using microcontroller,
by U. Datta, J. Roychaudhuri, N.P. Mukherjee & G. Balamurugan,
Proceedings of the Symposium on Manufacturing Excellence, January 7-8
2002, IIT, Madras, pp 69-70.
57. Study on development of cast components through rapid prototype soft
tooling process by B. Mondal, A.K. Lohar, S.K. Samanta and M.K. Jas,
Scientists, CMERI, Proceedings of the 50th Indian Foundry Congress 2002.
58. Study on strength and warpage of stereolithography models; P.S.
Banerjee, P.K. Maji, M.K. Banerjee, R.N. Banerjee, T.K. Chatterjee
59. Synthetic composite: a non-conventional material for machine tool
structures; K.P. Roysarkar, M.K. Banerjee
60. Technological aspects of particulates reinforced investment cast
composites; AK Lohar, SK Das, D Chakraborty, BN Mandal. Presented in the
National Conference on Investment Casting 2003.
61. Terrain aided autonomous navigation of subsea robots using natural
features; Somjyoti Majumder
62. Three-fold periodic tracking of flat plate solar collector with specular
reflector at top edge; M. Prasad
63. Tool path planning for investment casting functional prototypes /
production moulds; Nagahanumaiah, NP Mukherjee. Presented in the
National Conference on Investment Casting 2003.
64. Torque-load prediction in shrink fitted assemblies using artificial neural
network, D. Ramesh Raja Kumar, B. Ramamoorthy, S. Natarajan,
Proceedings of the 2nd. National Conference on Precision Engineering,
PSG College of Technology, pp 237-244.
65. Towards self reliance in power; GP Sinha & SK Neogi. Presented in the
National Symposium on ‘Towards Self Reliance in Power’, April 2003.
66. Trend prediction from steam turbine responses of vibration &
eccentricity; Dr. B.K. Sinha. Journal of Power & Energy.
67. Turbulence modelling using large-eddy simulation; H. Chattopadhyay
68. Turbulent flow structure due to a jet impinging on a moving plate; H.
Chattopadhyay
69. Viewing the IP Domain of Food Processing, K.K. Sanyal, Invention
Intelligence, March-April 2001.
CMERI - Published Research Papers
JOURNAL PUBLICATIONS DURING THE PERIOD 2000-2004 (Those
shown in red are SCI Publications)
1. Adsorption and photocatalysis of colour removal from waste water
using flyash and sunlight; by Debabrata Chatterjee, B. Ruj & Anima
Mahata, Catal.Commun. , 2 , (2001) , 113-117.
2. Ambient air quality status in Ranigunj-Asansol area, India; G.S. Reddy &
Biswajit Ruj; Environmental Engineering & Assessment, Volume 89, pp 153-
163, December 2003.
3. An investigation for control of residual stress in roller-straightened rails;
SL Srimani & J Basu; Journal of Strain Analysis for Engineering Design,
Volume 38, No. 3, pp 261-268, IMechE 2003.
4. Application of a dynamic subgrid scale model in prediction of heat
transfer from impinging knife jets; Chattopadhyay H, Cziesla T, Biswas G
& Mitra NK ; J. Progress in Computational Fluid Dynamics, Volume 3, 22-31,
2003.
5. Application of a dynamic subgrid scale model in prediction of heat
transfer from impinging knife jets; Chattopadhyay H, Cziesla T, Biswas G &
Mitra NK; J. Progress in Computational Fluid Dynamics, Volume 3, 22-31,
2003.
6. Computer aided design and automated system for card generation for a
Jacquard Loom used in the production of Baluchari saree; Partha
Bhattacharjee & Anjali Chatterjee; IE(I) Journal –TX, Volume 83, February
2003, pp. 34-40.
7. Deminelarization of organic pollutants on the dye modified TiO2
semiconductor particulate system using visible light; by Debabrata
Chatterjee & Anima Mahata, Appl.Catal. B: Environmental , 33, (2001), 119-
125.
8. Dirunal variation of sulphur dioxide and nitrogen dioxide in Ranigunj Asansol
area; G.S. Reddy, B. Ruj
9. Electron transfer reaction of [RuIII(edta)(pyz)]- with sulfite in aqueous
solution, Dr. D. Chatterjee, Trans. Metal Chem. , 25, (2000), 227-230.
10. Epoxidation of olefins with hypochloride catalysed by new Nickel(II)-
Schiff base complexes, Dr. D. Chatterjee, Sanghamitra Mukherjee &
Anannya Mitra, J. Mol. Catal(A), 154, (2000), 5-8.
11. Formation of mixed-valence R(IV)-Fe(II)- binuclear complex via the
reaction of [RuIII(edta)(H2O)] and [FeIII(CN)6]3- in a aqueous solution; M.S.
Ward, Dr. D. Chatterjee, Rex E. Shephed, Polyhedron, 19, (2000), pp 1339 -
46.
12. Homogeneous catalysis of C-H bond activation by novel Ruthenium(III) -
complexes; Dr. D. Chatterjee, Annanya Mitra, B.C. Roy, React. Kinet. Catal.
Lett. , 70, (2000), pp 147 - 151.
13. Interaction of rutheniumIII-edta with amino acids in aqua solution.
Equilibrium kinetic & protease inhibition studies; D. Chatterjee, M.S.A.
Hamza, Annanya Mitra, M.N. Shoukry, Sreerupa Desmukh, Rudi Van Eldik; J.
Chem. Soc. Dalton Transactions, 2003, 203-209*
14. Olefin epoxidation catalyzed by novel nickel(II)- complexes containing
tridentate Schiff-base ligands; by Debabrata Chatterjee and Sanghamitra
Mukherjee, Ind.J.Chem(A). 2002, 41(A), pp 1406-1409.
15. Oxidation of benzene with tert-butylhydroperoxide catalyzed by a novel
[RuIII(amp)(bipy)(H2O)]+ complex: First Report of homogeneously
catalyzed oxo-transfer reaction in benzene oxidation; by Debabrata
Chatterjee Anannya Mitra, Sanghamitra Mukherjee J.Mol.Catal(A) 165 (2001)
295-298.
16. Oxidation of organic substrates catalysed by a novel mixed-ligand
Rutheium(III) complex; Dr. D. Chatterjee, Annanya Mitra, B.C. Roy, Journal
of Molecular Catalysis (A), 161, (2000), pp 17 - 21.
17. Oxidation of organic substrates catalysed by a novel mixed-ligand
[RuIII(app)(pic)(H2O)]+ complex; Dr. D. Chatterjee, Annanya Mitra, Inorg.
Chem. Commun., 3, (2000), pp 640 - 644.
18. Oxidation of organic substrates catalysed by novel mixed-ligand
Chromium(III) complexes; Dr. D. Chatterjee, Sanghamitra Mukherjee, B.C.
Roy. React. Kinet. Catal. Lett., 71, (2000), 217-222.
19. Oxidation of organic substrates catalyzed by novel mixed-ligand
manganese(III) complexes; by Debabrata Chatterjee, Sanghamitra
Mukherjeea, and B.C.Roy J.Mol.Catal(A) , 169, (2001), 41-45.
20. Photoassisted detoxification of organic pollutants on the surface
modified TiO2 semiconductor particulate system; by Debabrata Chatterjee
& Anima Mahata, Catal.Commun. , 2, (2001), 1-3.
21. Photocatalytic reduction of hydrazine to ammonia catalysed by
[RuIII(edta)(H2O)]- complex in a Pt/TiO2 semiconductor particulate
system, Dr, D. Chatterjee, J. Mol. Catal(A), 154, (2000), 1-3.
22. Photodegradation of surfactant on the dye modified TiO2 surface using
visible light; Debabrata Chatterjee & Anima Mahata, Ind. J. Chem (A) 42A,
2003, 1627-1631.
23. Rail behaviour during cooling after hot rolling; J. Basu, S.L. Srimani and
D.S. Gupta; J. Strain Analysis, Volume 39, No. 1, pp 15-24, January 2004.
24. Reaction of cis-diaquo-bis(ethylenediamine)cobalt(III) with glycylglycine
in aqueous solution. Kinetic and mechanistic investigation; by Debabrata
Chatterjee, and Biswajit Ruj, Ind.J.Chem(A). 41(A), pp 1195-1198, 2002.
25. Reaction of cis-diaquo-bis(ethylenediamine)cobalt(III) with glycylglycine
in aqueous solution. Kinetic and mechanistic investigation; by Debabrata
Chatterjee, and Biswajit Ruj, Ind.J.Chem(A). 2002.
26. Response surface exploration for elastic modulus of epoxy concrete by
multi component mixture design; KP Roysarkar & MK Banerjee; JSME
International Journal, Volume 46, No. 4, December 2003, pp 1554-1562.
27. [Ru(hpsd)(bpy)]+ that completely hydroxylate benzene (hpsd(2-) = (2-
hydroxyphenyl)salicyldiminato); Scott Lujan, Joseph M. Slocik, Debabrata
Chatterjee, Annanya Mitra & Rex E. Shepherd, Inorg. Chim. Acta, 357, 2004,
785-796.
28. Simulation of laminar slot jets impinging on a moving surface; H.
Chattopadhyay & S.K. Saha; ASME Journal of Heat Transfer, Volume 124, pp
1049-1055, December 2002.
29. The substitution mechanism of [RuIII(edta)(H2O)]- with DNA bases,
nucleoside and nucleotides in aqueous solution revisited; by Debabrata
Chatterjee, Anannya Mitra , M.S.A. Hamza and Rudi van Eldik , J. Chem.
Soc. Dalton. Transc. 2002, 962-965.
30. The two-fluid modelling of gas particle turbulent transport phenomenon
in confined systems considering interparticle collision effects; A. Mitter,
A. Malhotra & H.T. Jadeja, Int.Jour.Num.Methods.Ht.&.Fld.Flow.; accepted,
September 2003./
31. Turbulent flow and heat transfer from a slot jet impinging on a moving
plate; Chattopadhyay H, Saha SK; Int. J. Heat Fluid Flow, Volume 24, 685-
697, 2003.
32. Visible light induced photodegradation of organic pollutants on dye
adsorbed TiO2 surface; D. Chatterjee, A. Mahata, Journal of Photochemistry
& Photobiology, (153), 2002, 199-204*
shown in red are SCI Publications)
1. Adsorption and photocatalysis of colour removal from waste water
using flyash and sunlight; by Debabrata Chatterjee, B. Ruj & Anima
Mahata, Catal.Commun. , 2 , (2001) , 113-117.
2. Ambient air quality status in Ranigunj-Asansol area, India; G.S. Reddy &
Biswajit Ruj; Environmental Engineering & Assessment, Volume 89, pp 153-
163, December 2003.
3. An investigation for control of residual stress in roller-straightened rails;
SL Srimani & J Basu; Journal of Strain Analysis for Engineering Design,
Volume 38, No. 3, pp 261-268, IMechE 2003.
4. Application of a dynamic subgrid scale model in prediction of heat
transfer from impinging knife jets; Chattopadhyay H, Cziesla T, Biswas G
& Mitra NK ; J. Progress in Computational Fluid Dynamics, Volume 3, 22-31,
2003.
5. Application of a dynamic subgrid scale model in prediction of heat
transfer from impinging knife jets; Chattopadhyay H, Cziesla T, Biswas G &
Mitra NK; J. Progress in Computational Fluid Dynamics, Volume 3, 22-31,
2003.
6. Computer aided design and automated system for card generation for a
Jacquard Loom used in the production of Baluchari saree; Partha
Bhattacharjee & Anjali Chatterjee; IE(I) Journal –TX, Volume 83, February
2003, pp. 34-40.
7. Deminelarization of organic pollutants on the dye modified TiO2
semiconductor particulate system using visible light; by Debabrata
Chatterjee & Anima Mahata, Appl.Catal. B: Environmental , 33, (2001), 119-
125.
8. Dirunal variation of sulphur dioxide and nitrogen dioxide in Ranigunj Asansol
area; G.S. Reddy, B. Ruj
9. Electron transfer reaction of [RuIII(edta)(pyz)]- with sulfite in aqueous
solution, Dr. D. Chatterjee, Trans. Metal Chem. , 25, (2000), 227-230.
10. Epoxidation of olefins with hypochloride catalysed by new Nickel(II)-
Schiff base complexes, Dr. D. Chatterjee, Sanghamitra Mukherjee &
Anannya Mitra, J. Mol. Catal(A), 154, (2000), 5-8.
11. Formation of mixed-valence R(IV)-Fe(II)- binuclear complex via the
reaction of [RuIII(edta)(H2O)] and [FeIII(CN)6]3- in a aqueous solution; M.S.
Ward, Dr. D. Chatterjee, Rex E. Shephed, Polyhedron, 19, (2000), pp 1339 -
46.
12. Homogeneous catalysis of C-H bond activation by novel Ruthenium(III) -
complexes; Dr. D. Chatterjee, Annanya Mitra, B.C. Roy, React. Kinet. Catal.
Lett. , 70, (2000), pp 147 - 151.
13. Interaction of rutheniumIII-edta with amino acids in aqua solution.
Equilibrium kinetic & protease inhibition studies; D. Chatterjee, M.S.A.
Hamza, Annanya Mitra, M.N. Shoukry, Sreerupa Desmukh, Rudi Van Eldik; J.
Chem. Soc. Dalton Transactions, 2003, 203-209*
14. Olefin epoxidation catalyzed by novel nickel(II)- complexes containing
tridentate Schiff-base ligands; by Debabrata Chatterjee and Sanghamitra
Mukherjee, Ind.J.Chem(A). 2002, 41(A), pp 1406-1409.
15. Oxidation of benzene with tert-butylhydroperoxide catalyzed by a novel
[RuIII(amp)(bipy)(H2O)]+ complex: First Report of homogeneously
catalyzed oxo-transfer reaction in benzene oxidation; by Debabrata
Chatterjee Anannya Mitra, Sanghamitra Mukherjee J.Mol.Catal(A) 165 (2001)
295-298.
16. Oxidation of organic substrates catalysed by a novel mixed-ligand
Rutheium(III) complex; Dr. D. Chatterjee, Annanya Mitra, B.C. Roy, Journal
of Molecular Catalysis (A), 161, (2000), pp 17 - 21.
17. Oxidation of organic substrates catalysed by a novel mixed-ligand
[RuIII(app)(pic)(H2O)]+ complex; Dr. D. Chatterjee, Annanya Mitra, Inorg.
Chem. Commun., 3, (2000), pp 640 - 644.
18. Oxidation of organic substrates catalysed by novel mixed-ligand
Chromium(III) complexes; Dr. D. Chatterjee, Sanghamitra Mukherjee, B.C.
Roy. React. Kinet. Catal. Lett., 71, (2000), 217-222.
19. Oxidation of organic substrates catalyzed by novel mixed-ligand
manganese(III) complexes; by Debabrata Chatterjee, Sanghamitra
Mukherjeea, and B.C.Roy J.Mol.Catal(A) , 169, (2001), 41-45.
20. Photoassisted detoxification of organic pollutants on the surface
modified TiO2 semiconductor particulate system; by Debabrata Chatterjee
& Anima Mahata, Catal.Commun. , 2, (2001), 1-3.
21. Photocatalytic reduction of hydrazine to ammonia catalysed by
[RuIII(edta)(H2O)]- complex in a Pt/TiO2 semiconductor particulate
system, Dr, D. Chatterjee, J. Mol. Catal(A), 154, (2000), 1-3.
22. Photodegradation of surfactant on the dye modified TiO2 surface using
visible light; Debabrata Chatterjee & Anima Mahata, Ind. J. Chem (A) 42A,
2003, 1627-1631.
23. Rail behaviour during cooling after hot rolling; J. Basu, S.L. Srimani and
D.S. Gupta; J. Strain Analysis, Volume 39, No. 1, pp 15-24, January 2004.
24. Reaction of cis-diaquo-bis(ethylenediamine)cobalt(III) with glycylglycine
in aqueous solution. Kinetic and mechanistic investigation; by Debabrata
Chatterjee, and Biswajit Ruj, Ind.J.Chem(A). 41(A), pp 1195-1198, 2002.
25. Reaction of cis-diaquo-bis(ethylenediamine)cobalt(III) with glycylglycine
in aqueous solution. Kinetic and mechanistic investigation; by Debabrata
Chatterjee, and Biswajit Ruj, Ind.J.Chem(A). 2002.
26. Response surface exploration for elastic modulus of epoxy concrete by
multi component mixture design; KP Roysarkar & MK Banerjee; JSME
International Journal, Volume 46, No. 4, December 2003, pp 1554-1562.
27. [Ru(hpsd)(bpy)]+ that completely hydroxylate benzene (hpsd(2-) = (2-
hydroxyphenyl)salicyldiminato); Scott Lujan, Joseph M. Slocik, Debabrata
Chatterjee, Annanya Mitra & Rex E. Shepherd, Inorg. Chim. Acta, 357, 2004,
785-796.
28. Simulation of laminar slot jets impinging on a moving surface; H.
Chattopadhyay & S.K. Saha; ASME Journal of Heat Transfer, Volume 124, pp
1049-1055, December 2002.
29. The substitution mechanism of [RuIII(edta)(H2O)]- with DNA bases,
nucleoside and nucleotides in aqueous solution revisited; by Debabrata
Chatterjee, Anannya Mitra , M.S.A. Hamza and Rudi van Eldik , J. Chem.
Soc. Dalton. Transc. 2002, 962-965.
30. The two-fluid modelling of gas particle turbulent transport phenomenon
in confined systems considering interparticle collision effects; A. Mitter,
A. Malhotra & H.T. Jadeja, Int.Jour.Num.Methods.Ht.&.Fld.Flow.; accepted,
September 2003./
31. Turbulent flow and heat transfer from a slot jet impinging on a moving
plate; Chattopadhyay H, Saha SK; Int. J. Heat Fluid Flow, Volume 24, 685-
697, 2003.
32. Visible light induced photodegradation of organic pollutants on dye
adsorbed TiO2 surface; D. Chatterjee, A. Mahata, Journal of Photochemistry
& Photobiology, (153), 2002, 199-204*
CMERI - Publications and Copyrights
Sl.No. Subject of Copy Right Application
filing
Copy Right
1. Drawings for cricket ball throwing machine Apr 2004
2. Course material on Engineering tolerancing May 2004
3. Drawings for circular wedge locking system for
a composite roll
May 2004
4. CMERI Ready reference Software Jun 2004
5. Mathematical Model for Determining Optimal
Production of Hot Metal in an Integrated Steel
Plant
Jul 2004
6. Gearing Sep 2004
7. Management Information System Software Sep 2004
8. Variables affecting the coke rate Sep 2004
9. Influence diagram for blast furnace fuel rate Sep 2004
10. Optimum capacity utilization by understanding
the characteristic marginal contribution graph
Sep 2004
11. Navigational algorithm and software for indoor
mobile robot Sep 2004
12. Rule based manufacturing process sequencing
software Oct 2004
13. Graph on general Nature of Marginal
Contribution & Net prifit Dec 2004
14. RIB Point V3.0 Software Jan 2005
15. Course material on Gear Manufacturing and
Inspection Feb 2005
16. Dawings for improved cricket bowling machine Mar 2005
filing
Copy Right
1. Drawings for cricket ball throwing machine Apr 2004
2. Course material on Engineering tolerancing May 2004
3. Drawings for circular wedge locking system for
a composite roll
May 2004
4. CMERI Ready reference Software Jun 2004
5. Mathematical Model for Determining Optimal
Production of Hot Metal in an Integrated Steel
Plant
Jul 2004
6. Gearing Sep 2004
7. Management Information System Software Sep 2004
8. Variables affecting the coke rate Sep 2004
9. Influence diagram for blast furnace fuel rate Sep 2004
10. Optimum capacity utilization by understanding
the characteristic marginal contribution graph
Sep 2004
11. Navigational algorithm and software for indoor
mobile robot Sep 2004
12. Rule based manufacturing process sequencing
software Oct 2004
13. Graph on general Nature of Marginal
Contribution & Net prifit Dec 2004
14. RIB Point V3.0 Software Jan 2005
15. Course material on Gear Manufacturing and
Inspection Feb 2005
16. Dawings for improved cricket bowling machine Mar 2005
CMERI Patents
PATENTS FILED DURING 2004-05
(March 2004 to Feb 2005)
Sl.No.--- Subject of Patent--- Date of filing
1. Fabric Bag Making Machine Jul 2004
2. Counter Gravity Casting Apparatus Aug 2004
3. An Orientation unit for fruit processing and
grading machine
Dec 2004
4. An improved Machine for Decorative Stitching of
Cricket Balls
Jan 2005
5. An automatic Machine for Chasing and Milling
of CTC Tea rollers
Feb 2005
6. An improved Cricket Bowling Machine Feb 2005
(March 2004 to Feb 2005)
Sl.No.--- Subject of Patent--- Date of filing
1. Fabric Bag Making Machine Jul 2004
2. Counter Gravity Casting Apparatus Aug 2004
3. An Orientation unit for fruit processing and
grading machine
Dec 2004
4. An improved Machine for Decorative Stitching of
Cricket Balls
Jan 2005
5. An automatic Machine for Chasing and Milling
of CTC Tea rollers
Feb 2005
6. An improved Cricket Bowling Machine Feb 2005
CMERI - Ongoing Projects - 2008 June
Generation of Hydrogen through Thermo-Chemical Gasification of Biomass
Drying Systems to improve Grain Quality in North East India
Indigenous Technology Development For Offshore Placer Mining
Design And Development Of A Steel-Based Bullock Cart
Design And Development Of A Plant For Making Parchment ?Like Leather Material From Chrome Shavings
AUTOMATIC MACHINE FOR SHARPENING / RESHARPENING OF CTC TEA ROLLERS
AUTOMATIC FRUIT SORTING AND GRADING MACHINE
DESIGN AND DEVELOPMENT OF AUTOMATIC JUTE BAG MAKING MACHINE
DEVELOPMENT OF AUTONOMOUS UNDERWATER VEHICLE
DEVELOPMENT OF ENHANCED ROV FOR OPERATING UPTO A DEPTH OF 300M
DEVELOPMENT OF RFQ HALF SCALE (1.7 M) & ACTUAL (3.2 M) MODEL PH-II
DEVELOPMENT OF RFQ HALF SCALE (1.7 M) & ACTUAL (3.2 M) MODEL PH-III
DESIGN & DEVELOPMENT OF AUTOMATIC PARALLEL SIDE STITCHED MOUTH HAMMED BAG STITCHING MACHINE
DEVELOPMENT OF AUTO-MATED ROLLING ELEMENT BEARING TEST STAND
DEVELOPMENT OF NON-CONVENTIONAL METHOD FOR MANUFACTURING OF LIGHT ENGG. COMPONENTS OF NEAR-NET SHAPE
REDUCTION OF RESIDUAL STRESS AND IMPROVEMENT IN END STRAIGHTNESS OF RAILS
NEAR NET SHAPE MANUFACTURING OF AL-ALLOY BASED CERAMIC REINFORCED METAL MATRIX COMPOSITES THROUGH INVESTMENT CASTING
DEVELOPMENT OF PROCESS TECHNOLOGY & MANUFAC-TURING OF AUSTEMPERED DUCTILE IRON COMPONENTS FOR ENGG. APPLICATIONS
DEVELOPMENT OF CRANKSHAFT FOR 35HP THREE CYLINDER SONALIKA TRACTOR ENGINE
APPLICATION OF PHOTO CATALYSIS FOR UTILIZATION OF SOLAR ENERGY IN DESTRUCTION OF WATER BOUND POLLUTANT
CRICKET BOWLING MACHINE
Drying Systems to improve Grain Quality in North East India
Indigenous Technology Development For Offshore Placer Mining
Design And Development Of A Steel-Based Bullock Cart
Design And Development Of A Plant For Making Parchment ?Like Leather Material From Chrome Shavings
AUTOMATIC MACHINE FOR SHARPENING / RESHARPENING OF CTC TEA ROLLERS
AUTOMATIC FRUIT SORTING AND GRADING MACHINE
DESIGN AND DEVELOPMENT OF AUTOMATIC JUTE BAG MAKING MACHINE
DEVELOPMENT OF AUTONOMOUS UNDERWATER VEHICLE
DEVELOPMENT OF ENHANCED ROV FOR OPERATING UPTO A DEPTH OF 300M
DEVELOPMENT OF RFQ HALF SCALE (1.7 M) & ACTUAL (3.2 M) MODEL PH-II
DEVELOPMENT OF RFQ HALF SCALE (1.7 M) & ACTUAL (3.2 M) MODEL PH-III
DESIGN & DEVELOPMENT OF AUTOMATIC PARALLEL SIDE STITCHED MOUTH HAMMED BAG STITCHING MACHINE
DEVELOPMENT OF AUTO-MATED ROLLING ELEMENT BEARING TEST STAND
DEVELOPMENT OF NON-CONVENTIONAL METHOD FOR MANUFACTURING OF LIGHT ENGG. COMPONENTS OF NEAR-NET SHAPE
REDUCTION OF RESIDUAL STRESS AND IMPROVEMENT IN END STRAIGHTNESS OF RAILS
NEAR NET SHAPE MANUFACTURING OF AL-ALLOY BASED CERAMIC REINFORCED METAL MATRIX COMPOSITES THROUGH INVESTMENT CASTING
DEVELOPMENT OF PROCESS TECHNOLOGY & MANUFAC-TURING OF AUSTEMPERED DUCTILE IRON COMPONENTS FOR ENGG. APPLICATIONS
DEVELOPMENT OF CRANKSHAFT FOR 35HP THREE CYLINDER SONALIKA TRACTOR ENGINE
APPLICATION OF PHOTO CATALYSIS FOR UTILIZATION OF SOLAR ENERGY IN DESTRUCTION OF WATER BOUND POLLUTANT
CRICKET BOWLING MACHINE
Central Mechanical Engineering Research Institute - India
In India, mechanical engineering technology has accounted for nearly half of the total technology imported. In terms of products, nearly one third of the value of total imports is for mechanical engineering equipment.
In order to develop indigenously mechanical engineering technology for the industries so that R&D can play a key role in self-reliance, the Central Mechanical Engineering Research Institute at Durgapur, West Bengal was established in February 1958 with the specific task of development of mechanical engineering technology.
The Central Mechanical Engineering Research Institute (CMERI) is the apex R&D institute for mechanical engineering under the aegis of the Council of Scientific and Industrial Research (CSIR ). Being the only national level research institute in this field, CMERI's mandate is to serve industry and develop mechanical engineering technology so that India's dependence on foreign collaboration is substantially reduced in strategic and economy sectors.
Besides, the institute is facilitating innovations and inventions for establishing the claims of Indian talent in international fields where Indian products shall ultimately compete.
In order to develop indigenously mechanical engineering technology for the industries so that R&D can play a key role in self-reliance, the Central Mechanical Engineering Research Institute at Durgapur, West Bengal was established in February 1958 with the specific task of development of mechanical engineering technology.
The Central Mechanical Engineering Research Institute (CMERI) is the apex R&D institute for mechanical engineering under the aegis of the Council of Scientific and Industrial Research (CSIR ). Being the only national level research institute in this field, CMERI's mandate is to serve industry and develop mechanical engineering technology so that India's dependence on foreign collaboration is substantially reduced in strategic and economy sectors.
Besides, the institute is facilitating innovations and inventions for establishing the claims of Indian talent in international fields where Indian products shall ultimately compete.
Subscribe to:
Posts (Atom)